All Our Products

Mil-Tac (Military-Tactical) Assemblies are required when the assembly is exposed to moisture, dust, heat or regular repeated use.
By using high quality components you can own an assembly that will survive the challenges that you throw at it.

Severe duty reel designed to withstand extreme temperatures, corrosive materials and repeated or sustained impacts, making it ideal for harsh environments.  Available with a range of accessories to suit the demands of various applications.

24 Port 1U Unloaded Keystone Patch Panel allows for mounting up to 24 keystone jacks. The panel accepts Cat5e, Cat 6 and Cat6A keystone jacks in one row within 1U.

24 Port 1U Unloaded Keystone Patch Panel (V-Panel) allows for mounting up to 24 keystone jacks. The panel accepts Cat5e, Cat 6 and Cat6A keystone jacks in one row within 1U.

48 Port 1U Unloaded Keystone Patch Panel allows for mounting up to 48 keystone jacks. The panel accepts Cat5e, Cat 6 and Cat6A keystone jacks in two rows within 1U.

Snap-fit Cat5e keystone jacks will fit our range of keystone patch panels and most UK/Euro applications. Excellent quality, high precision and easy to terminate, exceeding Cat5e standards.

Snap-fit Cat6a keystone jacks will fit our range of keystone patch panels and most UK/Euro applications. Excellent quality, high precision and easy to terminate, exceeding Cat6a standards.

Cost-effective and flexible. Planar Wavelength Circuit (PLC) Splitters are used to divide the incoming signal into equal outgoing signals. Available in ratios from 1 x 2 up to 1 x 128, with or without connectors.

Our fibre optic Pigtails, are available in 250µm, 600µm or 900µm. Available with a wide range of connectors, sold as singles or multipack pack size. Large stocks held of standard lengths or custom made to order.

Bespoke Copper assemblies to suit your application and environment. Available in Cat5e, Cat6 and Cat6a, with Cat7 available upon request.

Housing up to 8 fibres via 2 LC Quad adapters or 4 fibres via ST/FC or SC Simplex/Duplex adapters. Not recommended for Splicing. External dims: 110 x 110 x 60 mm.

Housing up to 16 fibres via 4 LC Quad adapters or 8 fibres via ST/FC or SC Simplex/Duplex adapters. Can accommodate up to 24 Splices. External dims: 165 x 154 x 84 mm.

Housing up to 24 fibres via 6 LC Quad adapters or 12 fibres via ST/FC or SC Simplex/Duplex adapters. Can accommodate up to 48 Splices. External dims: 230 x 180 x 88 mm.

Housing up to 96 fibres via 24 LC Quad adapters or 24 fibres via ST/FC or SC Simplex/Duplex adapters. Can accommodate up to 144 Splices. External dims: 320 x 250 x 135 mm.

Loomed Copper assemblies supplied in Kopex, pre-terminated and tested. Either free-ended, RJ45 terminated or punched down. Can be supplied with staggered or non-staggered ends.

2 to 24 Fibre - Lightweight and compact with 2mm tails, best suited within Data Centres for multifibre patching.

4 to 24 Fibre - Uses tight buffered cable with 900µm tails suited to indoor horizontal & vertical LANs and fitted to patch panels.

4 to 24 Fibre - Uses loose tube cable suitable for outdoors and ducts. Fitted with 2mm tails for use within panels or direct patching.

48 to 192 Fibre - Uses gel filled or dry multi-loose tube cable and can be fitted with simplex, duplex or MTP connectivity.

4 to 24 Fibre - Uses Corrugated Steel Tape (CST or STA) cable for high rodent and crush resistance.

4 to 24 Fibre -Pre-terminated Steel Wire Armoured (SWA) fibre optic cable assemblies offering high protection against rodents, weathering, crushing and tensile damage

Mini Pro OTDR is the perfect all-in-one handheld device for evaluating FTTx and access network construction and maintenance, identifying fibre breakpoints, measuring cable length, and calculating relative optical power losses.

Compact and versatile design. Sliding drawer style with various front plates and adapter options, to accommodate up to 576 Fibres.

Spacious and modular. With a dropdown rear door for easier access during installation & maintenance. For up to 288F.

UK Manufactured Test Reference Leads with optimised end-face geometry and enhanced optical performance, custom made to suit your requirements.

Small, yet smart. The T-402S Sumitomo Fusion Splicer boasts a long battery life, high environmental resistance, proven field toughness and reliable performance. Suited for indoor and outdoor applications.

Fast and versatile. The Sumitomo T-502S Splicer, the World’s first AI-Programmed Next Generation Active Clad Aligned Fusion Splicer, offers improved splicing efficiency, accuracy, performance, and user experience.

Tough and practical. The Sumitomo T-57C+ Core Aligned Fusion Splicer, powered by NanoTune™ technology offers an enhanced splicing experience delivering a reliable performance.

Our Simplex patch leads consist of a single fibre within an outer jacket fitted with a connector at each end. Choose from a wide selection of connector and fibre type combinations. Best suited for indoor patching requirements.

Lightweight and compact. The T-72C+ Sumitomo Splicer, the World’s first AI-Programmed High-Definition Core-Aligned Fusion Splicer delivers improved splicing, reliability, experience and performance.

Versatile and high precision. The T-72M12+ Sumitomo Splicer, successor to the T-72M12 model features patented NanoTune™ AI technology, improving splicing accuracy and efficiency enabling mass splicing.

Our Duplex patch leads are a zip cord construction, fitted with two fibre connectors at each end for Tx/Rx transmission. Choose from a wide selection of connector and fibre type combinations. Best suited for indoor patching requirements.

Our Ruggedised Duplex patch leads are two simplex cables covered with an outer jacket, fitted with two fibre connectors at each end for Tx/Rx transmission. Choose from a wide selection of connector and fibre type combinations. Best suited for indoor patching requirements where extra protection is required.

Our Round Duplex patch leads are a single jacket cable containing two individual fibres, fitted with a Uniboot duplex connector at each end for Tx/Rx transmission. Choose from a select range of connector and fibre type combinations. Best suited for indoor and data centre patching requirements.

Strong by design. Our Armoured leads feature a metal armouring for physical protection against crushing, rodent damage, & mechanical stress.

Weather resistant & UV protected. Pre-terminated Drop Cables, with a PUR jacket, for aerial installation.

B2ca compliant. Pre-terminated Drop Cables, with a LSZH jacket, for indoor installation.

Flexible and cost-effective. Our Hybrid option, combine the features of both Outdoor and Indoor Drop Cables.

Our 10G SFP+ DACs (Direct Attach Cables) consist of two SFP+ modules with a copper cable permanently embedded into each end. This SFP+ passive cable assembly is a high-performance, cost-effective interconnect solution to deliver 10G.

Our 25G SFP28 DACs (Direct Attach Cables) consist of two SFP28 modules with a copper cable permanently embedded into each end. The SFP28 passive cable assemblies are high-performance, cost-effective interconnect solutions to deliver 25G.

Our 40G QSFP+ (Quad Small Form-Factor Pluggable Plus) DAC passive cable assemblies consist of two QSFP+ modules with a copper cable permanently embedded into each end. The QSFP+ passive cable assemblies are high-performance, cost-effective interconnect solutions to deliver 40G.

Our 100G QSFP28 DAC cable is a network cable that is popular among network builders because of its high speed, low power consumption, and ability to create rack-to-rack connections across small distances. Featuring four separate 25Gbps data lanes, it is mostly used for short-distance communication.

Ruggedised Harnesses or Fan-outs, as they’re sometimes known, allow the direct connection between MTP® adapters and other connector types.

MTP® Lite Trunk cable assemblies are of a lightweight single jacket construction, designed to optimise space saving of trunk patching.

Dual channel technology, to deliver a transmission rate of 10G.

MTP® Tuff Trunk cable assemblies are of a robust double jacket construction, designed for longer length trunk patching.

Dual channel technology, to deliver a transmission rate of 25G.

MTP® Multi-Lite Trunk assemblies are a neat solution for providing up to three MTP®-MTP® links within a compact, high density ruggedised cable.

48 to 144 Fibre - MTP® Multi-Tuff Trunk assemblies offer exceptional fibre counts from 48F up to 144F, all contained within one robust trunk link assembly.

Quad channel technology, to deliver a transmission rate of 40G.

Quad channel technology, to deliver a transmission rate of 100G.

Designed to quickly identify the direction of light being transmitted in the fibre and display the relative core power without damaging the fibre.

Designed to quickly identify the direction of transmitted fibre and display the relative core power without damaging the fibre.

This Professional Multi-Function OTDR is the perfect all-in-one handheld device for evaluating FTTx and access network construction and maintenance, identifying fibre breakpoints, measuring cable length, and calculating relative optical power losses.

Designed to provide 850/1300 nm or 1310/1550 nm wavelengths, this optical light source is the perfect tool for providing a stable light source for multimode or single-mode fibre measurements with FC/LC/SC (PC/UPC) adapters.

Designed to provide either 1310 nm or 1550 nm wavelengths, this optical light source is the perfect tool for providing a stable light source for single-mode fibre measurements with FC/LC/SC adapters for PC/UPC connectors.

Designed to perform live testing with OLT equipment, this PON Power Meter is perfect for use during FTTx/PON service tune-up or maintenance.

Primarily used in long haul applications, this fibre optic power meter is perfect for measuring both the absolute optical power and relative power loss in fibre optic cables with FC/SC/LC adapters.

Power Meter with Data Storage is the perfect power meter for measuring and recording both the absolute optical power and relative power loss in fibre optic cables.

Perfect for measuring both the absolute optical power and relative power loss in fibre optic cables with FC/SC/LC adapters.

A fully automated inspection solution, with fast and reliable IEC or custom standards certification.

This fully automated fibre inspection solution that provides fast and reliable test results consistently.

 Fully automated inspection solution for single fibre and multi fibre connectors that provides fast and reliable test results consistently.

The industry's fastest, self-contained, fully automated inspection scope for single fibre and multifibre connectors.

Fully automated fibre inspection solution for single and multi fibre connectors, delivering fast and consistent test results.

An MPO testing tool engineered to effectively certify a significant quantity of MPO links for both single fibre and multifibre.

Complete solution for MPO polarity, continuity and connector inspection.

With its array of configurations and wavelength options, the FOT-600 proves to be perfect for link qualification purposes.

Up to three single-mode and multimode wavelengths on a single port with a digitally encrypted wavelength identification protocol for transmission.

A lightweight, tablet design inspired OTDR. Fully featured, suitable for metro use and capable of testing through optical splitters.

Optical transceivers are electronic devices that convert electrical signals into optical signals and vice versa. Used in fibre optic communication systems to transmit data over long distances, they are essential components of data centres, telecommunications networks, and industrial automation. They are also used in medical devices, aerospace and defence applications, and research and education.

Fast and precise. The FC-6C+ Sumitomo Cleaver offers benchtop fibre cleaving with automatic return system, ensuring quick and easy operation for all cable construction fields.

Robust and fast. The FC-6S+ Sumitomo Cleaver offers benchtop fibre cleaving with automatic return system, ensuring quick and easy operation with a blade life of 60,000 fibres.

Tough yet lightweight. Our Single and Multi-Fibre Launch Leads are custom made to suit your requirements.

Efficient and compact. Our 19" Lite Linke cassettes and chassis' are a modular design, that can be scaled to meet network demands.

Custom length optical fibre network simulator suited to standard 19” racks & cabinets or for bench top operation.

The portable version is housed within a strong carry case giving greater flexibility. Ideal for mobile training applications or within a test environment.

Precise and robust. The FC-6R+ Sumitomo Cleaver offers benchtop fibre cleaving with automatic return system, ensuring quick and easy operation, with a blade life of 60,000 fibres.

Handy and versatile. The FC-7LS from Sumitomo is a cost-effective handheld Cleaver featuring an ergonomic design high-quality blade, designed to withstand 48,000 cleaves.

Compact and handy. The FC-8R handheld Sumitomo Cleaver, suitable for all cable construction fields with an auto rotating blade for single fibres and up to 12 fibre ribbons.