Tooling

Designed to open the toughest heavy-duty cable and duct jackets, the RCS-50 is perfect for performing lateral and longitudinal cuts on submariner cables, large fibre ducts, or large count telephone cables at least 1 1/2" (3.81 cm) in diameter.

This product is the replacement blade for the RCS-30 Ratcheting Duct and Cable Slitter. This blade is made of steel for high durability and long life. It penetrates duct walls up to 5 mm thick, allowing you to make mid span window cuts in cables and ducts.

This product is the replacement blade for the RCS-25 Ratcheting Cable Slitter. This blade is made of steel for high durability and long life. It is also ground and heat-treated to provide a razor-sharp edge. The blade is double-ended so that when one side becomes worn out, you can simply reverse the blade and use the other side.

Designed to create mid-span slits and window cuts in ducts and heavy-duty cables, this ratcheting cable slitter is the perfect tool for slitting and ringing cables or ducts greater than 25 mm in diameter.

Designed to dismantle heavy-duty cables, this ratcheting cable slitter is the perfect tool for slitting and ringing round cables greater than 25 mm in diameter.

The Jonard Tools RC-500 Ratcheting Cable Cutter is designed to cleanly cut copper and aluminium power cables up to 500 MCM (240 mm²) and other similarly sized multi-conductor cables.

This product is the replacement blade for the RCS-50 Submariner Cable & Large Duct Slitter.

The MS-600 Mid Span Shaving Tool is designed to provide easy access to optical fibres in outer jackets and loose buffer tubes. With 6 precision grooves to handle various cable sizes, the sleek ergonomic design allows you to open a fibre jacket or buffer tube without damaging the fibre inside.

The MS-600 Mid Span Shaving Tool is designed to provide easy access to optical fibres in outer jackets and loose buffer tubes. With 6 precision grooves to handle various cable sizes, the sleek ergonomic design allows you to open a fibre jacket or buffer tube without damaging the fibre inside.

The PATENTED and award-winning MS-526 Mid Span Slit and Ring Tool is designed to provide easy access to optical fibres in Corning Altos loose tube cable with binderless FastAcess technology (as well as other similar thin-walled 9.8 to 18.2 mm diameter jackets). Building on the popularity of the Jonard Tools MS-6 and MS-26 Fibre Optic Mid Span Slitting Tools, we have incorporated a ring feature in the tool to make it even more versatile.

The PATENTED and award-winning MS-526 Mid Span Slit and Ring Tool is designed to provide easy access to optical fibres in Corning Altos loose tube cable with binderless FastAcess technology (as well as other similar thin-walled 9.8 to 18.2 mm diameter jackets). Building on the popularity of the Jonard Tools MS-6 and MS-26 Fibre Optic Mid Span Slitting Tools, we have incorporated a ring feature in the tool to make it even more versatile.

The PATENTED and award-winning MS-446 Mid Span Slit and Ring Tool is designed to provide easy access to optical fibers in AFL's Heavy Duty OSP MicroCore® (LMHD-Series) cables as well as other thick-walled 8.7 to 14.6 mm diameter jackets.

This is the replacement blade set for the MS-336 Fibre Optic Mid Span Slit & Ring Tool. This replacement blade set is for cable diameters from 7.8 mm to 11.4 mm. The blades are made for long term use and last for up to 5,000 slits/cuts.

The patented and award-winning MS-26 Mid Span Slit Tool is designed to provide easy access to optical fibers in outer jackets and loose buffer tubes. With 5 precision grooves to handle various cable sizes, the sleek ergonomic design allows you to open a fiber jacket or buffer tube without damaging the fiber inside.

Designed to slit and ring many types of buffer tubes, breakout cables, and other types of jacketed cables, this fibre jacket slit, and ring tool is perfect for slitting OFS Minicord EZ-Bend and other similar cables.

Designed to slit and ring many types of tight buffers, loose tube buffers, breakout cables, and other types of jacketed fibre cables, this tool is perfect for any fibre technician.

Jonard Tools' fibre optic tweezers are designed to handle electrical wire, fibre optic cable, and small electronic components without damaging them.

This is the replacement blade set for the MS-446 Fiber Optic Mid Span Slit & Ring Tool. This replacement blade set is for cable diameters from 8.7 mm to 14.6 mm. The blades are made for long term use and last for up to 5,000 slits/cuts.

The PATENTED MS-336 Mid Span Slit and Ring Tool is designed to provide easy access to optical fibres in thin walled outer jacketed cables. The MS-336 is an extension of the MS-326 series tool targeting larger cables such as Corning's Minixtend HD 288 and 432 fibre count cables.

Designed to cleave either 900 µm buffered or 250 µm coated fibre.

Primarily used in long haul applications, this fiber optic power meter is perfect for measuring both the absolute optical power and relative power loss in fiber optic cables.

The Jonard Tools Fibre Optic Power Meter with Data Storage is the perfect power meter for measuring and recording both the absolute optical power and relative power loss in fibre optic cables.

The Jonard Tools Mini Optical Power Meter is perfect for measuring both the absolute optical power and relative power loss in fiber optic cables. It also features a built-in visual fault locator and network cable tester and remote.

The Jonard Tools Fibre Optic Power Meter is perfect for measuring both the absolute optical power and relative power loss in fibre optic cables.

This Fibre Optic Cold Cure Termination Tool Kit allows on-site installers to terminate fibre cable without the need for a curing oven.

The Jonard Tools RC-600 Ratcheting Cable Cutter is designed to cleanly cut copper (up to 600 MCM), aluminium (up to 750 MCM), and multi-conductor cable.

The patented and award-winning MS-6 Mid Span Slit Tool is designed to provide easy access to optical fibres in outer jackets and loose buffer tubes. With 6 precision grooves to handle various cable sizes, the sleek ergonomic design allows you to open a fibre jacket or buffer tube without damaging the fibre inside.

This is the replacement blade set for the MS-316 Fiber Optic Mid Span Slit & Ring Tool. This replacement blade set is for cable diameters from 2.9 mm to 6.8 mm. The blades are made for long term use and last for up to 5,000 slits/cuts.

This is the replacement blade set for the MS-426 Fiber Optic Mid Span Slit & Ring Tool. This replacement blade set is for cable diameters from 5.8 mm to 12 mm. The blades are made for long term use and last for up to 5,000 slits/cuts

This is the replacement blade set for the MS-306 Fiber Optic Mid Span Slit & Ring Tool. This replacement blade set is for cable diameters from 1.2 mm to 3.3 mm. The blades are made for long term use and last for up to 5,000 slits/cuts.

This molded 2 pocket tool pouch comes included with our TK-350 Fiber Stripper & Kevlar® Shears Tool Kit.

Featuring the best selling JIC-186 Wire & Kevlar® Cutting Shears and JIC-375 Three Hole Fiber Optic Stripper in a convenient molded pouch, the TK-350 Fibre Stripper & Kevlar® Shears Kit is the essential tool kit for any fibre technician.

Featuring the most popular slitting, ringing, stripping, and cutting tools, this Fiber Prep Kit+ provides a large range of tools needed to access and prepare fibre optic cables for termination.

The patented MS-316 Mid Span Slit and Ring Tool is designed to provide easy access to optical fibres in outer jackets and buffer tubes. Building on the popularity of the Jonard Tools MS-6 and MS-26 Fibre Optic Mid Span Slitting Tools, we have incorporated a ring feature in the tool to make it even more versatile.

The patented MS-326 Mid Span Slit and Ring Tool is designed to provide easy access to optical fibres in thin-walled outer jackets. Building on the popularity of the Jonard Tools MS-6 and MS-26 Fibre Optic Mid Span Slitting Tools, we have incorporated a ring feature in the tool to make it even more versatile.

The patented MS-306 Mid Span Slit and Ring Tool is designed to provide easy access to optical fibres in outer jackets and buffer tubes. Building on the popularity of the Jonard Tools MS-6 and MS-26 Fibre Optic Mid Span Slitting Tools, we have incorporated a ring feature in the tool to make it even more versatile.

The Jonard Tools BTR-6 Buffer Tube Ring tool provides quick access to fibres inside buffer tubes from 1.2 mm to 6 mm in diameter and will work with buffer tubes with wall thicknesses from 0.2 mm to 0.5 mm. The tool is light and durable with a hardened steel blade for long life and includes a hole for tethering.

Designed to cut large fibre ducts up to 64 mm (2.52”) in diameter, this fibre duct cutter is perfect for cutting PVC, CPVC, PE, HDPE, PEX and other non-metallic tubing.

The Jonard Tools MDC-14 is designed to cut microducts precisely, this microduct cutter is perfect for cutting most microducts including tubing made from PVC, Nylon, and other materials up to 14 mm in diameter.

The Jonard Tools JIC-186 Wire and Kevlar® Cutting Shears are designed to cut Kevlar®, cabling insulation, tape, cable ties, and other materials with ease.

The Jonard Tools JIC-375 Three Hole Fiber Optic Stripper performs all common fibre stripping functions.

Designed to slit and ring fibre optic cables from 1.2 mm to 7.5 mm (0.05” to 0.3”) in diameter, this cable slit and ring tool is perfect for slitting and ringing cables, buffer tubes, and jackets on fibre optic cables.

Designed for use on LC and SC simplex and duplex connectors, this tool is perfect for inserting and extracting fibre optic connectors in high density patch panels.

Designed to crimp RJ11/12 and RJ45 connectors onto CAT3, CAT5/5e, and CAT6 cables, this pass-through connector crimper is perfect for any network installer.

The patented CST-1i Cyclops Wire Stripper is the perfect tool for removing the outer insulation from all unshielded and shielded twisted pair and multicore cables.

The PATENTED CST-1900 Round Cable Strip & Ring Tool is designed for fast and precise removal of cable jackets from round cables that are 3/16” to 1 1/8” (4.5 mm-29 mm) in diameter.

With pre-set factory settings and no adjustments required, this fibre optic stripper is designed to strip 250μm buffer coating to expose the 125μm optical fibre in fibre optic cables.

This tool kit provides everything you need to measure power and provide a stable light source for fibre optic cable testing.

This tool kit provides everything you need to measure power and provide a stable light source for fibre optic cable testing.

Designed to cut through the water blocking binders of buffer tube bundles or other thin ropes and strings.

Designed to grip RG59, RG6, RG7, and RG11 cables, this COAX cable gripping tool facilitates the stripping, slitting, splicing, and other functions of coaxial cables.

Designed to insert and extract LC connectors in high-density patch panels, the FCT-200 is the perfect tool for working with LC connectors in tightly packed bulkheads.