Mil-Tac

  • UK Made
    • Man
    Leader Optec

    Mil-Tac (Military-Tactical) Assemblies are required when the assembly is exposed to moisture, dust, heat or regular repeated use.
    By using high quality components you can own an assembly that will survive the challenges that you throw at it.

    Request a Quote

    Mil-Tac


    So that we can provide you with an accurate quote, please complete the fields below or call us on +44(0)1745 586600

    Fibre Mode 
    Fibre Count 

    For Fibre Counts greater than 24, please visit our High Fibre Count page under Pre-Terminated Assemblies.

    Connector End A 

    If you're unsure what connector you need, please discuss with out sales team.

    Connector End B 

    If you're unsure what connector you need, please discuss with out sales team.

    Reels 

    Please select the style of drum you require. A suitable size will be quoted for you. If you require any drum accessories, please comment at the end.

    If there are any other information/specifications that you would like to add, please do so here

    Preferred method of contact: 
    50%
    Specifications
    Fibre Mode:

    Single-mode, OM1, OM2, OM3, OM4, OM5.

    Fibre Count:

    2, 4, 8, 12, 24 - Connector dependent.

    Higher fibre counts available upon request.

    Connector Options:
    • (IP9) SC Simplex, SN, MPO,
    • (IP16) LC Duplex, SC, SN, MPO,
    • (Amphenol Eurolens) Expanded beam in 2 and 4 Channel.
    • Other connectors available upon request
    Cable Length:

    Standard length measurement is from breakout to breakout.

    Key Features
    • Rugged Mil-Tac outdoor cable
    • Mil spec or IP rated connectors
    • Can be supplied on re-deployable reels
    • 2 - 24 Fibres on all modes.
    • UK manufacture.
    Benefits
    • Suitable for rugged outdoor applications.
    • IP67 or IP68 rating (dependant on connector choice).
    • Supplied on a choice of reels and drums.
    • Ideal for re-deployable use.
    • Custom made & fast turnaround.
    • Evaluation and repair service available.
    Cable Construction
    • PUR outer jacket
    • Additional Kevlar for increased durability
    Breakout Styles
    • If the number of fibres exceed the connector fibre count, a breakout will be used to add more connectors.
    • S-Line 14mm diameter with 12x 2mm tails.
    • M-Line 28mm diameter with 24x 2mm tails.
    • Tail lengths from 0.3m to 2.5m.
    Protection Options

    Protection options are not usually required but may be possible if needed.

    Non-Staggered tails:

    • Braided sleeve with pulling eye – 50N tensile force.
    • PVC Sleeve with pulling eye – 30N tensile force.

    Staggered tails:

    • Braided sleeve with pulling eye – 50N tensile force.
    • PVC sleeve with pulling eye – 30N tensile force.
    • Clear protection tube (28mm widest point) – 400N tensile force, 400N/100²mm crush.
    • Reinforced protection tube (35mm widest point) – 400N tensile force, 1000N/100²mm crush.
    Applications

    Depending on the connectors and cable chosen, these assemblies are suited to the following applications:

    • Military
    • Broadcast
    • Marine
    • Energy

    Need some help?

    Send us a message or contact our team on +44(0)1745 586600 and we will be happy to talk through your requirements.

    Amphenol PO Eurolens

    pdf, 4.014 MB

    Download Amphenol PO Eurolens

    SENKO IP16 MPO Series

    pdf, 570.27 KB

    Download SENKO IP16 MPO Series

    You might also like...

    View all products

    Tight Buffered

    Find out more about Tight Buffered
    • UK Made

    CST (Armoured)

    Find out more about CST (Armoured)
    • UK Made

    SWA (Armoured)

    Find out more about SWA (Armoured)
    • UK Made

    High Fibre Count

    Find out more about High Fibre Count
    • UK Made

    Compare Mil-Tac

    This Product

    Typical Application
    Outdoor; e.g. Harsh Environments
    Jacket Material
    PUR
    ArmourMedium
    Kevlar
    Crush Resistance
    High
    Armour
    -

    Tight Buffered

    Typical Application
    Indoor; e.g. LAN Networks, Data Centres and Office Buildings
    Jacket Material
    LSZH
    ArmourMedium
    -
    Crush Resistance
    Low
    Armour
    None
    Find out moreabout Tight Buffered

    CST (Armoured)

    Typical Application
    Harsh Environments; e.g. Industrial Settings or Outdoor applications
    Jacket Material
    PE, LSZH
    ArmourMedium
    -
    Crush Resistance
    High
    Armour
    Corrugated Steel Tape
    Find out moreabout CST (Armoured)

    SWA (Armoured)

    Typical Application
    Harsh Environment; e.g. Industrial settings, Outdoor applications and Direct Burial
    Jacket Material
    PE, LSZH
    ArmourMedium
    -
    Crush Resistance
    High
    Armour
    Steel Wire Armour
    Find out moreabout SWA (Armoured)

    Accreditations

    Request a callback

    Sign up to the Leader Optec E-News

    * required field
    Marketing Permissions

    Please select how you would like to hear from us:

    You can unsubscribe at any time by clicking the link in the footer of our emails. For information about our privacy practices, please visit our website.

    As a GDPR compliant company, we would like to explain why you have received this email. We believe your company has a legitimate need for our company updates and information. For more information relating to B2B email marketing permissions please refer to the ICO's guidance relating to the PECR B2B email marketing. Please refer to clause 142-145.

    We use Mailchimp as our marketing platform. By clicking below to subscribe, you acknowledge that your information will be transferred to Mailchimp for processing. Learn more about Mailchimp's privacy practices.